NAP Spitfire Broadheads Review | In-Depth Testing

In this review, I test a classic mechanical broadhead… the NAP Spitfire 125 grain.

I’ve used the Spitfire in the field a number of times and have taken a lot of animals with it.

The NAP Spitfire | A Closer Look

So let’s zoom on in here and go through some of the design features and specifications…

Here’s a good look at the NAP Spitfire mechanical broadhead. This is just a classic front-deploying mechanical broadhead.

It has an aluminum ferrule and it has these micro grooves in it, which are designed to give it greater stability in flight. Like a golf ball, as it rotates, it carries the air around with it and NAP claims that this keeps it from planing as much.

It has a hardened steel tip and the blades open up to a cutting diameter 1-½”.

So, you have three blades, and a 1-1/2″ cut, which is a nice size cut overall.

You can see that the blades are quite swept back too, which aids in penetration. By my measurements, the blades are 0.030″ thick, and they stay closed by a spring clip system. So, they’re quite secure in flight. It takes a bit of force to open them, but they’re kind of angled back to help them open on impact a little bit better. But, they are very secure in flight.

Now, there are also offset blades in a closed position. That’s going to aid a bit in flight, because it creates a bit more rotation and it’s going to help them be a little bit more forgiving.

And then, as the blades open and penetrate, they will also create a nice wound channel and it may even cause some rotation within the medium due to those offset blades.

New Archery Products Spitfire 3-Blade Durable Precise Front-Deploying Archery Bowhunting Mechanical Broadhead - 3 & 4 Pack

$28.45

Buy Now

We earn a commission if you make a purchase, at no additional cost to you.

12/17/2024 11:38 pm GMT

NAP Spitfire Testing

I was really eager to put these heads to the test and see how they perform. 

For these tests, I used my Bowtech CP28 set at 72 pounds. I’m using Bishop FOC King Arrows for most of the shots. For the really hard impact shots, I’ll be using the Bishop FAD Eliminator.

Flight Forgiveness (1 Field Point And 1 Broadhead At 30 Yards)

As you can tell, the field point and the broadhead were right on top of each other. Great flight!

Initial Sharpness (Out-Of-The-Box)

The blade sharpness out-of-the-box was 200 (the lower number, the better).

Penetration Test 1 (2/3″ Rubber Mat, 1/2″ MDF, FBI Ballistic Gel)  

The Spitfire penetrated 5 ¾”. And here’s the entrance hole. I want to show.

The blades didn’t open on impact into the MDF. The entrance cut was the size of the blades in the closed position.

HYF Adult Compound Bow Package,USA Gordon Limbs,Fully Adjustable 19-30 Draw Length Without Bow Press,19-70Lbs Draw Weight,Hunting Compound for Beginners, Right Hand (Black)

Buy Now

We earn a commission if you make a purchase, at no additional cost to you.

Edge Retention Test (Sharpness After Penetration Test 1)

After the first penetration test, the blades registered at 300 in the sharpness test.

Penetration Test 2 (Layered Cardboard):

The Spitfire penetrated through 48 layers of cardboard.

Angled Shot Test (1/4″ MDF/Carpet):

I shot the Spitfire into angled MDF fronted by carpet.

Durability Test (1/2″ MDF Max 3 shots):

Here’s the head after 3 shots through the MDF and it held together really well. The only damage is that one of the blades bent a bit. You can see that it kind of curved to the side, but it was just that one blade that bent.

Here’s the head after 3 shots through the MDF, and it did fairly well.

Durability (22ga steel plate max 2 shots):

But, then on the first shot into the steel plate, it broke 2 of the blades. They just got sheared and twisted off. One remained in place. There was one piece that I could find. It bounced off a few walls and I could hear it. It kind of bounced around the room. I’m glad it didn’t hit me!

The Spitfire will not be going to go on to the concrete block round (where I shoot the head into a concrete block), because it only made it through one shot in the steel plate instead of two. And, with that kind of breakage, I just don’t want to risk anymore damage to myself in shooting it into the concrete.

Additionally, broadheads have to earn the right to make it into the concrete by staying intact through the steel plate as well as the MDF. But overall, again, it did well through the MDF.

Here’s the steel plate and you can see that one of the blades is stuck in the steel plate. The other one you can see just broke off and flew throughout the room somewhere. And then the other one did cut through the steel plate.

Shooter Buck 3D Deer Archery Target with Replaceable Core, brown

$119.99

Buy Now

We earn a commission if you make a purchase, at no additional cost to you.

12/17/2024 11:53 pm GMT

Final Thoughts On NAP Spitfire Broadheads

So what do you think of the Spitfire? Hey, you know, this head has been around for a long time and it certainly has some really good strengths to it.

I love the offset blades and I love the way they are pretty sharp out of the package. And, I love the way it flies.

But, there are also some weaknesses to it.

I’m not a big fan of front-deploying broadheads because I want to get at least one big hole. If I don’t get a pass through, I at least want that first hole to be a good one. And, rear-deploying head typically tip the odds in my favor of getting that big hole, if I’m just going to get one.

Check out the scorecard below and see if the Spitfire might be a good fit for you.