When it comes to your bowhunting setup, knowing the “Kinetic Energy” of your arrow allows you to know how much energy that arrow possesses due to motion, from being shot by your bow. The “Momentum” tells you how much force it will take to stop your arrow when it reaches its intended target.

Kinetic Energy and Momentum Arrow Calculator

Kinetic Energy And Bowhunting (How I Got Here)

In all fairness, I have been heavily influenced by Dr. Ed Ashby’s 12 Arrow Penetration Factors and his almost 30 years-long Natal Study.  These are, in fact, the basis for my YouTube channel and all of the research I have been doing therein.

Anyway, just to set the record straight, the biggest overlap between Dr. Ed, the Ashby Bowhunting Foundation, and the Ranch Fairy is simple: We want to know the highest performing projectile for all impact points to pass through the animal you are hunting.  

---

---

The goal is maximum arrow lethality. 

I like to put it this way: Archery is shooting a target… bowhunting begins at impact with the target.

Finally, I am constantly seeking higher performance and am always questioning what I know today. 

Why?

Because the longer I live, the more I look back and say, “wow, my assumption about bowhunting 3 years ago (along with many things in life, not just bowhunting) was flawed.”

I keep learning because I kept asking “why” and kept trying to find out ”why.”

---

---

---

The Science Of Arrow Flight

So, now I have embarked upon the science side of the arrow. Some questions to consider:

• Why does an arrow fly?
• Why does an arrow fail to penetrate?
• Why do we measure it with scientific formula?
• Which formula is correct – OR – is it a combination of formulas?
• Are we right? (oh man, check the man card here!)

---

---

Big Mike and a “Rocket Man”

I like to say, “It’s better to have smart friends than to be smart.” And, I have had the luxury of meeting ‘Big Mike’ who has coached me on the “functional bow and arrow flight” part of this game. 

And then, the latest addition… enter, “The Rocketman,” Darrel R. Barnette. 

Darrel spent 30 years with the Department of Defense (D.O.D.) testing “boring” things like, tank penetrators and rail guns. 

Just to clarify, the Rocketman says he technically never worked on a ‘rocket’.  But, he did shoot, test, and evaluate hard target penetrators pushing Mach 11. 

So, ya know, an arrow is a bit slower. 

Heretofore, Darrel is known as “the Rocketman.” 

When the Rocketman starts talking, he gives me about 15-20 minutes (until steam starts to come out of my ears) and then he pulls back on the reigns. 

Ballistic coefficient, Poncelet equation, yaw, lift, aerodynamic friction and drag, the Physics Hyper Textbook on and on and on. 

Bro! He has me doing calculus!

---

#ad

---

---

---

---

Kinetic Energy And Arrow Flight

So on to Kinetic Energy (KE), which is super boring. But, we’ll play along, since it is the most common measurement of bow efficiency.

But is it the right one? 

More to come, but for now,  I’ll stay on the rails with Kinetic Energy so the speed bow guys can relate with ‘hitting the target’.  

ki·net·ic en·er·gy
/kəˈnedik ˈenərjē/
noun
energy which a body possesses by virtue of being in motion.

Oxford Languages

---

---

---

---

The first time Rocketman said, “well, Troy, a bow is just a spring with fixed Kinetic Energy,” I thought… BLASPHEMY! 

But, from what I understand, he is right. 

The bow can’t “make” more KE. It is what it is. 

BUT, you can change the arrow and gain some…..so hang on. Let me set the table here… 

KE Arrow Testing

On a basic level, radar measures a projectile’s speed over distance. 

The testing unit that we used measures 5 total distances.  So, if you want to shoot 60 yards, the computer divides that distance into 5 increments. 

[NOTE TO SELF – you need to put the target further than 60 yards to capture the flight speed. To address this, we placed the target at 70 yards. Because, if impact is at 60 yards, the data would be flawed for velocity testing because the target stops the arrow at a yardage that it should be being measured.]

---

---

#ad

---

Below is the spreadsheet, graphs, etc., shooting 3 different bows under the conditions described above.  

Yeah, its super small. I don’t intend for you to read it and geek out (but that’s coming… keep reading!)

Just know that it’s a lot of information, and we ran the best test we know to do… today anyway.  (See my comments on being smart, today, included earlier in the article.  We will be smarter very soon!)

The Tools In Our Kinetic Energy Toolkit

The three bows we used in the Kinetic Energy testing were:

1. Elite Kure 65#/28.5” draw
2. Xpedition Xcursion 6 65#/28.5” draw length (my beloved “Pamela”)
3. Mathews DXT 70#/29” draw length

I bare shaft tuned 350, 300, and 250 spine Sirius Apollo arrows to achieve the following arrow weights (in grains): 388, 436, 514, 589, 616, 670, and 718. (Learn more about arrow spine here.)

Our goal was to see the ‘launch’ velocity vs. 60 yard ‘impact’ velocity. (Remember the target was at 70 yards).

Just to revive our blasphemy! “A bow is a kinetic energy spring, with fixed kinetic energy”. 

---

---

Test Results (and fancy graphs, oh boy!)

So, the charts below tell us the story.

The top line is the launch velocity. The change in velocity is super boring… Until you look at the 60 yard impact KE. 

The gap in the data sets shows the significant reduction in KE over distance. However, you see that gap narrow as arrow mass increases. 

As you can see, in all the above graphs, the launch KE is relatively constant, but alas, further away, at 60 yards, with higher mass projectiles, we see something worth pondering. (Well, only if you think math is correct!)

---

---

What are the results telling us? (Please pardon the steam coming out of my ears)

So, despite my heavy arrow bias, (I’m not much of a hair splitter), increasing launch KE 3-6 ft/pounds is really boring. 

But the lower line, at 60 yards, is worth chewing on. 

If you search around, many of the wide mechanical broadheads suggest KE’s of 45-60 ft-lb’s. Now, they don’t go out on a limb and say, “that will create a pass through, or break bones.” It’s just a recommended impact KE. 

---

Formula for Kinetic Energy:
K.E. = 1/2mv²
(where m=mass of object and v=velocity)

---

And be clear, just like the firearms world, this is launch KE, maximum velocity. This is because a projectile can’t go faster once it leaves the muzzle or the string… It’s always slowing down. 

Silly aerodynamic drag. 

Now in a vacuum… oh wow, throw in some zero gravity and guess what?

It still doesn’t go faster….. it would maintain launch velocity and you wouldn’t be able to breathe to test it. 

Aw Shucks.

---

---

There have been multiple companies and YouTube personalities showing fixed blade vs. mechanical pressure testing on deer thoraxes and other items simulating a critter. They use very complicated mechanical devices down to something as simple as a bathroom scale. 

Let’s just say, the HUGE differences are eye popping.  

It’s not half a pound or 3, it’s exponential. The “precision” of the device doesn’t matter when the difference is 40 pounds.  Please search those tests up, because I know you’ll go do it anyway.   

---

---

Final Thoughts (For Now)

So, here’s the thing to ponder…

If X brand broadhead requires 50 ft-lbs to penetrate and another type takes, say, 10 ft-lbs., which one leaves you more energy to continue pushing? 

Remember Newton’s 3^rd law…“For every action there is an equal and opposite reaction.”

---

---

So in this case, the tissue will push back 50 ft-lb on the one broadhead and 10 ft-lb on the other… but the arrow is exerting 70 ft-lb.

Given that, the broadhead requiring 50 ft-lbs has to have at least 50.1 ft-lbs. to continue moving and the 10 ft-lb broadhead requires 10.1 ft-lbs to keep moving.

The arrow has to overcome the equal and opposite push back exerted by the tissues: hair, meat, bone, etc.

---

---

PLUS, here’s the kicker.  Harder things push back… harder.

You can just blame this on Newton’s 3rd law of physics. This will keep my hate mail down!

So, for the 50 ft-lb broadhead, if your bow produces 70 ft-lbs, you have 20 foot pounds of extra work potential.  

Now, with that same bow generating 70 ft-lbs, shooting a beefier broadhead that only requires 10 ft-lbs to penetrate, has 60 ft-lbs of extra work potential. 

If you could guarantee you’d never hit anything hard on a deer, elk or other critter, and always shoot between the ribs, none of this matters… you have a winner. 

I’m not that good. So, give me all the extra I can get!

---

---

What’s next…

What we haven’t studied, is actually shooting the different broadhead platforms to measure the exit velocities or impact velocity.  That one will take “some doing” to get it right. 

Trust me, I want to know if I am right and “why.”  The math here says I am.  But Dr. Ed always says, “we won’t know until we actually test it under those conditions”. 

So, we will. 

This is why you donate to the Ashby Bowhunting Foundation, so we can go test these things and increase your effectiveness. 

More to come.