wild turkey gobbler

Beards, Feathers and Snoods, Oh My! | Anatomy Of A Turkey

The wild turkey is a complex creature and has some anatomical features that are pretty peculiar. Many hunters may not know what some of these features are and how they help a turkey survive in nature.

So, let’s take a closer look at the anatomy of the wild turkey.

Eyes

If you are an avid turkey hunter, you are likely aware that this bird sports some powerful eyesight and can detect a turkey hunter with ease if they are not properly concealed and camouflaged.

Unlike us human hunters, the wild turkey possesses monocular periscope vision.

turkey eye

Turkeys have powerful eyesight, nearly a 360-degree field of vision, and each eye can move independently of the other.

Monocular periscope vision allows the eyes of the turkey to act independently from one another, allowing them to scan for potential threats in two different directions simultaneously.

Turkeys also have eyes situated on the sides of their head and not in a forward-facing direction. The positioning of the eyes and the independent operation they are capable of means that turkeys have nearly 360 degrees of viewing range.

turkey eyes and ears diagram

The ears of a turkey are located right behind the eyes.

The eyes being able to scan so much of the immediate area around them means they can pick up the slightest movements with ease and is one of the reasons they are so challenging to hunt.



Ears

Like all birds, the turkey doesn’t have any external ear features, and their ears are essential, just holes in their head directly behind their eyes.

The ears of the turkey feature pinpoint hearing, and if you have ever called in a turkey from a long distance, you will have observed how they can pinpoint the exact location of the sound and track directly to you.

a turkey's ears

Turkey’s have an uncanny ability to judge distance with their ears.

Despite not having external ears that serve as a sort of “radar dish” to detect noises from a wide range of directions like a deer, the turkey has hearing that can easily pinpoint the exact location of noise, and their brains will even register the distance of the sound from the bird.


Avian X LCD Lookout Hen Lifelike Collapsible Turkey Gobbler Hunting Decoy w/ Carbon Stake, Carry Bag, & Storage Compression Strap
$81.01
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/25/2024 04:17 pm GMT

Snood

The snood is an anatomical feature that a turkey possesses that causes most hunters to scratch their heads and ask, “what is that thing for?”

The most noticeable feature which has the fitting name of a snood is the familiar bright red lumpy area located on the throats of male turkeys.

turkey snood

A turkey’s snood helps to regulate body temperature, and in males, help to attract female turkeys (hens).

The snood serves a few different purposes for male turkeys, with the biggest being attraction to the opposite sex, with the bright ornamentation helping attract females for breeding.

This weird anatomical feature also serves another critical role for tom turkeys. It helps dissipate excess heat and helps regulate the bird’s body temperature on those hot summer days.



Head Coloration

The colorations of the head of a male wild turkey are to this day not fully understood, and the colors can change depending on the bird’s mood.

The Coloration of the head can change from blue to white to red, and the bird can do so based on moods like agitation, excitement, irritation, fear, and others.

turkey head coloration

A turkey’s head colors can change, depending on factors like fear, anger and during mating.

When it comes to mating, there will often be a prominent white coloration at the top of the head, and this occurs when a tom is approaching hens or, in many cases, a hunter or decoy that the tom thinks is a hen.




Beard

The beard of a tom turkey serves the same purpose as the coloration and snood, to attract hens. The beard of a tom turkey isn’t actually a beard at all but a modified form of a feather.

While males use it to attract hens, hen turkeys are also known to sport a beard, albeit on a rare basis. This has led some experts to not definitely hold the beard as a definitive in terms of its’ role.

turkey gobblers with beards

The beard of a make turkey has a texture similar to a thick monofilament fishing line, and is used to attract hens.


Rhino Blinds R180 3 Person See Through Hunting Ground Blind, Realtree Edge
$239.99
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/24/2024 11:28 pm GMT


Spurs

One of the anatomical features of a turkey that is a trophy feature among hunters are the spurs.

turkey spurs

A turkey grows spurs on the back of each leg near the foot, and can be used for defense as well as for fighting.

The spurs serve two primary purposes for a tom turkey; it is the major form of defense for the bird, and hunters try to avoid them when retrieving a recently downed bird for this very reason.

Tom turkeys also use these spurs to fight other toms for the same reasons bucks or rams fight, to establish a hierarchy within the flock, as turkeys are social animals.

Just like the antlers of a buck, the spurs of a tom turkey can cause severe lacerations, cuts, and bruising, so be cautious when approaching a wounded tom.



Tail Feathers

The tail feathers are probably the most prized feature of a tom turkey among hunters, and both hunters and toms love to display them.

turkey tail feathers

A turkey’s tail feathers are the prize possession of turkey hunters.

The tail fan of a turkey serves a few purposes; it makes them look larger when they are fully displayed, which serves as a form of intimidation to other toms when fighting during the mating season and attracts hens.

The large tail feathers also serve as a rudder when flying, helping the bird control their direction of flight and helping them brake and slow down when they come in for a landing or when roosting in the trees at night.

turkey tail feathers rear view

Here’s a look at a turkey’s tail feathers from behind the bird.



Wings

Unlike other birds, a turkey will rarely use flight to simply get around due to being a relatively heavy bird and use flight for the purposes of getting up into trees for roosting and back down again.

But don’t be fooled, as a threatened turkey can kick into high gear and escape nearly any potential threat quickly by flying fast and low, albeit in relatively short bursts compared to other birds.

turkey profile shot showing wings

Although turkeys can fly, their wings are used primarily to fly up and down from their roosting locations.

The wings also serve a purpose in establishing dominance in the flock hierarchy, with “wing slapping” being a common way for toms to fight and work their way to the top of the pecking order.

turkey wings

during mating season, a male turkey will often “strut” with it’s tail feathers up and its wings pointed in a downward fashion

Wings also come in handy for dusting, which is when a turkey wallows down into dry dirt and ruffles its feathers to spread a fine powdery coat of dust on itself.

Dust baths keep the feathers of the turkey in optimum condition and are a part of their preening and plumbing maintenance, as the dust absorbs excess oils and moisture.

turkey feather dusting area

A turkey will “dust” its feathers, in an area like this, to keep their wings from being matted and to help prevent parasites and mites.

Dusting keeps the feathers of the bird from becoming matted and greasy and provides clean and aerodynamic feathers for maximum efficiency during flight, and also helps prevent feather mites and parasites.



Final Thoughts On Turkey Anatomy

The turkey is a very intriguing animal and a great resource for hunters.

Understanding details about the animals you pursue in the field will help you become a better hunter and will also give hunters a larger appreciation and understanding of the resources they enjoy.

So, whether you are a turkey hunter of just wanting to learn more about these amazing birds, we hope this article on the anatomy of a turkey helped you understand these amazing birds better!

crimson talon broadheads header image

Crimson Talon Broadheads (Fixed Blade) | The Inside Information

In this review, I tested three models of the Crimson Talon fixed-blade broadheads.

Crimson Talon makes the G2, the G2 Hyperspeed and the Outlaw.

crimson talon broadheads

The Crimson Talon lineup features the G2, the G2 Hyperspeed and the Outlaw.

The G2 Broadhead Specs

First we have the G2. It has a camouflage ferrule that they refer to as “ferruleflage.”

What initially stands out about the G2 is that it has six total blades – three main blades and three bleeders.

The main blade’s diameter is 1.25 inches, which is a big cutting diameter for a 3-blade head.

crimson talon g2 broadhead blades

The G2 broadhead has curved blades as well as a camo ferrule they call “ferruleflage.”

The cutting diameter of the smaller bleeder blades is 1/2 an inch. So, although they are shorter, they help with the cut.

The total cut of this head is 2.6 inches!

The bleeders are also offset at a 60-degree angle, so that allows them to create an even better wound channel and do damage that is difficult to close up.


Crimson Talon Broadheads G2-100 Grain (3 Pack)
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.

But the biggest differentiating factor on the G2 broadhead is that the main blades are curved. This apparently creates two advantages…

The other advantage of the curved blades is that once they hit the animal, they continue to rotate, causing a spiral wound channel. Combine that with the 1.25 inches of cutting diameter and 2.6 inches of blade cutting, and that creates a wound channel that is very difficult to close up.

Crimson Talon calls this curved blade feature their “spintite” airfoil technology. As the arrow flies, the curved blades function as vanes or fletchings would, creating quick rotation of the shaft, which results in more accurate flight. This is supposed to prevent arrow planing.

The tip is made out of A2 tool steel, so a really tough, beefy chisel tip of a very high quality steel. The ferrule is 7075 aluminum, which is a very stout, durable aluminum, stronger than some steels.

The blades of the G2 broadhead are 420 G2 stainless steel. The main blades were 0.028 inches thick, which is relatively thick compared to some other blades. But, with so much blade cutting action going on, that probably isn’t going to be an issue.




We’ll see how it does in the durability test below.

One of the cool things about all of the Crimson Talon broadheads is that they have 100% lifetime warranty for any breakage, for any reason, with no expiration and no limitations. So, if any of these heads break, you just send them in and you get a replacement. That’s pretty nice especially at the price point that they are sold at.



G2 Hyper Speed Specs

The next broadhead I tested was the G2 Hyperspeed. It’s the same head as the G2, but without the airfoil design. So, the blades are all straight.

hyperspeed broadhead blades

The Hyperspeed broadhead is like the G2, but without the curved blades.

Now, the bleeders are still offset at a 60-degree angle, but everything is just a straight blade. Some people that don’t want the airfoil designs will like this head.

I remember when I lived in Colorado, the Crimson Talons were illegal (at least at that time) because the blades had to exist in a continual single plane. They couldn’t be curved.

Crimson Talon Broadheads Hyper Speed - 100 Grain (3 Pack)
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.

The Outlaw Specs

The last Crimson Talon head I tested was The Outlaw.

The Outlaw is it’s really basic in some ways and unique in others. It’s basic in the sense that it’s a 3-blade head with a 1-1/8 inch cut. It’s a little bit different in that all three blades are offset. The 0.040 inch thick, stainless steel blades are an offset design, to create a better wound channel.

offset blades of outlaw broadheads

The Outlaw broadhead has offset blades and a 1-1/8″ cut.

The tip is hard stainless steel and the ferrule is solid titanium. It also has a 3-blade locking system, keeping the blades in three different places, which is supposed to make these heads very durable and have really good blade retention.


Crimson Talon Outlaw 100-Grain (3 Pack)
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.

Crimson Talon Broadhead Testing

I was eager to put all of these heads to the test.

I tested them for flight, edge retention, sharpness, penetration and durability.

Let’s see how this Crimson Talon lineup performed.




Crimson Talon Flight

All three of the Crimson Talon heads were able to pop a balloon at 70 yards.

Edge retention results (out-of-the-box sharpness)

For the Crimson Talon G2, I just tested the sharpness and edge retention of the straight blades (Hyperspeed), because it’s too difficult to get it all lined up with the curved blades and they are the same blades anyway.

stroking arrow on g2 broadheads shaft

The Crimson Talon G2 Hyperspeed cut paper after 5 strokes of the arrow.



stroking an arrow shaft on outlaw broadhead

The Outlaw cut paper after five strokes of the arrow.

Penetration results (ballistic gel)

penetration of crimson talong broadheads in ballistic gel

The penetration of these heads was pretty much as expected. The Outlaw penetrated the most at 8 and a half inches, followed by the Hyperspeed at 7 and a quarter inches. And then the G2 with the curved blades penetrated 6 and 3 quarter inches.



g2 broadheads into ballistic gel

Down at the bottom there in the middle, you can see the wound channel of the G2 and you can see that rotation. The blades actually rotated from initial impact with the rubber foam mat to their final resting place. They rotated 90 degrees. So that’s pretty cool. That’s like a single bevel, 2-blade head in terms of rotation. And, that’s a wicked-looking wound channel as well.



crimson talon broadhead holes in steel plate

Here are all three heads after going through the 22-inch steel plate five times each. I was definitely impressed with the durability. I really didn’t expect any of them to make it through all five times. I expected them to lose blades on maybe the second or third shot. But, none of them did. All of them held their blades together really well and stayed intact.



Penetration (steel plate)

If you look at the holes that the heads made in the steel plate, it’s really interesting. You can see that the Hyperspeed (top right) made the most impressive holes. It made really big, triangular holes with extra wide cuts in the tips.

g2 broadhead damaged blades

Notice the G2 with the curved blades. I’m really surprised that it held together like it did. The blades did not straighten out when going through the steel plate five times. They really stayed curved together, which is really impressive. Also, the holes are still really big. You can see the curls in the ends. It didn’t make as big of a triangular hole as the Hyperspeed for some reason, but it still made a really impressive wound channel with those “S-cuts.”



outlaw after going through steel plate

The Outlaw held together as well. And you can see the holes are a bit smaller there, that at a 1 1/8 inch cut.

Edge Retention (steel plate)

Now, in terms of the edge retention and the durability of the blades themselves after going through the steel plate; again, all of them stayed intact. None of them bent out of shape. But, all of them did get really nicked up.



The one that probably got the most nicked up was the G2. Because of those curved blades, the head hits the steel in a new place each time as it curves around. And so, those edges would have had to be replaced after probably the third or fourth shot. But they still held intact. You can imagine there might be some damage when coming in contact with a rib, shoulder or other bones of a deer.




The Outlaw has the thickest blade, so they took a big brunt of the impact on the steel and they got next most nicked up (although the tip held together perfectly and the A2 tip on the G2 and on the Hyperspeed look brand new).

The Hyperspeed got the least amount of damage on the blades. It made it through four times before it would have had to be replaced. So, it stayed in relatively good shape. Some of the blades were still perfectly intact and some were nicked up.

So overall, really impressed and surprised with the durability of these heads.



Crimson Talon broadheads: Final thoughts

So what do you think of the Crimson Talons? I’ve got to say, I was really impressed.

When I first saw the price point looked at the heads, I thought, “Man, these things are going to fall apart.” I just thought they were kind of cheap.

But man, I was wrong! They really did perform in each one of the tests that I did on them. I was pleasantly surprised.



So, you can check out the score sheets below and see how they rank compared to each other and compared to other heads.

After reviewing these heads, if I had to pick a winner between them, it would definitely be between the G2 and the G2 Hyperspeed. And which one would be the winner would be based on my setup and on what animal I’m pursuing.

g2 broadhead score card
hyperspeed broadhead score card
outlaw broadhead score card


If I’m going after a really big animal or I have a lighter setup where I need to maximize penetration, then I’m going with the Hyperspeed.

If I’m using a setup that has a little bit more momentum, and I’m going after an animal like a whitetail sized animal, I’m going with the G2 because that is one wicked-looking wound channel!

But these two heads are fantastic heads. If I decide to pick one for my setup then it would be the G2. But, I’d be a 100% confident using both of them on an animal.

Great job, Crimson Talon. Give these a look. 

gravedigger hybrid broadhead

Gravedigger Broadheads Review | The Inside Information

In this review, I’m going to be covering a broadhead that has been around for a while. It’s one I’ve actually used in the field quite a bit and been fairly successful with. It’s called the Gravedigger.

The Gravedigger Hybrid broadhead overview

Let’s take a look at the design and some of the features of the Gravedigger Hybrid head (it’s called a “hybrid” because it has both fixed and mechanical blades). Then, I’ll show you how it performed when I put it through my standard array of tests.

gravedigger hybrid broadhead in closed position

Here is the Gravedigger hybrid in the closed position.

gravedigger hybrid broadhead chisel tip

This Gravedigger hybrid model has the chisel tip. (They also make a cut on contact tip where the fixed blades extend all the way up to the top).

The cutting diameter of the Gravedigger Hybrid’s fixed blades is 1 inch. In the closed position, the mechanical blades are ½-inch. So, just in the closed position, if the blades were not to open at all, it would be an inch and 1/2 of a cut, which is no slouch of a cut.

But the mechanical blades do open. They open really well, in fact. They’re not held in place by an O-ring or a retention clip, but rather just by friction, and that’s adjustable with a small Allen bolt.

The cutting diameter in the open position here is a full 1 and 3/4 inches. So, 1 and 3/4″ by 1″ – that’s a lot of cut!

adjustable friction screw on gravedigger broadhead

You can adjust the tension that holds the blades in place. But, when they encounter a medium, they open over the top and they fall back into their fully opened position.


BLOODSPORT Gravedigger Extreme 4-Blade Hunting Hybrid Mechanical Broadhead with Chisel Tip - 100 Grains | 2.25" Cutting Diameter | 3 Pack
$37.03
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/25/2024 01:58 am GMT



Gravedigger Blade specs

The blades of the Gravedigger are made out of a 416 stainless steel. The ferrule is a 7075 aluminum. It’s a pretty vented blade, but it’s still is a good stout aluminum, and the tip is a hardened steel, really stout, chisel tip.

I couldn’t find any information listing the blade thickness, so I used my micrometer to measure. The fixed blade measured 0.039 inches thick and the mechanical blades were 0.032 inches thick.

Gravedigger broadheads testing

I was eager to see how this head performed in my tests. I did not test it for long range flight, because I know it flies really well.

I consider it like a mechanical in terms of flight in the closed position, and I don’t test mechanicals for long range flight, because they all fly really well, even though this head has the little one inch fixed blade. I know it flies fantastic.

I tested for edge sharpness and retention, for penetration, and for durability.

Let’s see how the Gravedigger performed.


Pine Ridge Archery The Arrow Inspector, Black
$30.99
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/25/2024 12:13 am GMT


Sharpness Test

The Gravedigger cut paper after four strokes of the arrow.

carbon arrow shaft dulling the gravedigger hybrid

I use strokes of carbon shaft arrow to dull the blades. I want to see if they can still cut paper after each stroke.

gravedigger broadhead paper cut test

I use strokes of carbon shaft arrow to dull the blades. I want to see if they can still cut paper after each stroke.



Ballistic Gel Penetration Test

The Gravedigger penetrated 6 and 1/4 inches through the foam and ballistic gel.

gravedigger ballistic gel penetration

The Gravedigger penetrated 6-1/4″ into the ballistic gel.



entry hole of gravedigger broadhead in ballistic gel test

Here’s the entrance of the Gravedigger. And you can see that the mechanical blades opened almost 1-3/4″ on impact. That bottom blade for whatever reason deployed a bit more effectively than the top blade. But, both of them opened up quite well for an over the top mechanical.





MDF penetration test

I shot the Gravedigger through MDF five times. Below are the pictures.

I shot the first one in the closed position and the baldes didn’t open very much. But, then on the following shots, I kept the head in the open position when I was shooting, just to test durability.

gravedigger hybrid after going through MDF

Here, you can see the Gravedigger after going through a half inch MDF five times. As you can see, it held up relatively well. The tip is in still in great shape. The ferrule is also in great shape. The fixed blades are in perfect shape. And the mechanical blades also did really well. They didn’t break off.



bent blades on gravedigger broadhead after going through mdf

Now, in terms of a bend, they did bend backwards a bit. The original on the left gives you a frame of reference. After the shots, there is quite a bit of arch to the expandable blades. But you know what? If you’re going to have a problem with the head kind of “failing,” that’s the way to do it. It’s not really a fail, because it’s continuing to cut even after going through this MDF five times. So, if there’s going to be any kind of a problem, to bend in that direction is the way to go. So overall, very impressive.





Final Thoughts

So, what do you think of the Gravedigger?

Going through these tests reminded me why I liked it so much when I first started using it way back.

There are just so many heads. It’s hard to keep using just one. I’m a broadhead junkie and like to keep trying new things!

But, this is definitely a broadhead that’s worth a look. There are some weaknesses to it but there are a lot of strengths to it as well. It performed fairly well for an over-the-top mechanical.

So, check out the score sheet below and see what you think about it, and decide if these broadheads are the right heads for you.

gravedigger hybrid scorecard
Gravedigger Hybrid score card.