hunting video gear

Start Filming Your Hunts | A Self-Filming Checklist

I sat there stunned at what just happened.

I had traveled 500 miles for this particular moment, only to sit and watch this big Kansas buck walk right out of my life.

And, it wasn’t because I didn’t have the opportunity to let an arrow fly.

I actually took aim, settled my pin, and painfully watched my arrow hit right in front of his body.

big kansas buck

When you film your own hunts, moments like this will be captured indefinitely to not only relive yourself, but share with others.

I could not believe my eyes! I’ve made that exact shot in my yard 10 out of 10 times.

As I sat there 20 feet up in that oak tree, trying to figure out what happened, I heard something behind me coming down the same trail. I turned to catch a glimpse of a wide Kansas buck heading my way.

I couldn’t believe this was happening so soon after I had missed the other deer.

This time, I was even more determined to settle my pins and connect on this nice Kansas buck! 

As I released the arrow, I watched intently as it found its mark and sent the buck bolting through the woods to certain death.



Finally, after two years of hunting in Kansas, I was able to enjoy the fruits of my labor. It was a very exciting moment for me, as I anxiously texted my hunting buddies… “Big Buck Down.”

What makes this hunt even more special is the fact that I got it all on video.

Videoing my hunts allow me the privilege to watch them anytime I want to.

With today’s technological advances, it doesn’t have to cost an arm and a leg to get started filming your own hunts. Keep reading for two things that you will need to get started…

The scenario above happened almost a year ago. I went back and watched it five minutes before I wrote this article.

When I’m having a bad season and not seeing very many deer, I can always go back and watch the moment I killed my first Kansas buck.

Talk about a very rewarding experience.



First thing you need to film your hunts: Video Equipment

Choosing the right equipment is going to be a critical piece of the puzzle for creating quality footage of your hunts. This equipment can be as expensive or as cheap as you would like, depending on what you are after.

Let me just assume that most of us are on a limited budget but would still like pretty good equipment to capture our hunts.



The below list is certainly not all of the things that you could buy for filming your hunts. However, these are all of the things that you should buy for filming your hunts.

These pieces of equipment will help you be able to effectively tell your hunting story verbally and visually. 


Energizer 100AA Ultimate Lithium Long Lasting Leakproof Batteries
$208.18
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/27/2024 02:29 am GMT

There are five pieces of video equipment that are critical to getting started filming your hunts… and they won’t break the bank. Read on for specifics of each…

  • Camera
  • Camera arm
  • External microphone
  • Fluid head
  • Remote control

Video Camera

video camera for filiming hunts

The Canon 6D Mark 2 is a good camera for capturing your primary video while filming your own hunts.

Obviously, you cannot film hunts without a camera, but what camera do you choose? That’s a great question that gets asked often.

First, It is very important that you choose a camera that is “High Definition” and has good low-light capabilities. The high definition will help you have clearer footage and the low light capabilities will help you get a few extra minutes of film time in the morning and the evenings. After all, you never know when you’re going to see something so rare that you’ll wish you had footage of it later on.



It is also important that you get a camera that has an external mic jack. If you are self-filming, it is important for you to choose a camera that has a good auto focus setting.

We currently use a Sony Ax-53 ($800) and a Canon 6D Mark 2 ($1500.)

Secondary cameras are also a big help to capture extra footage, such as GoPro, Spypoint or Tacticam.




Camera Arm

fourth arrow video camera arm for hunting videos

It’s important to be sure you have a camera arm with enough length to film in some of the awkward positions hunting can put you in.

It wasn’t until a recent hunt that I realized how important stabilization was for a camera.

We were on a hunt and managed to forget the arm plate, so I had to free-hand film the hunt. A doe came into our location and circled around the tree and put me in an awkward position while filming.

When we watched the footage back on the TV, I was shocked at how shaky I was. This one experience made me even more of a believer in good camera arm.



It’s important to choose a camera arm that has some length to it. This will help when the deer puts you in an awkward position of filming across your body or around the back of your tree.

Fourth Arrow has some amazing camera arms that are affordable, ($100-$300) adjustable, and easy to use. Muddy also has some great camera arms that are reasonably priced ($100-$300) and easy to use.


Muddy Outfitter Camera Arm, Black, One Size
$86.85
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/28/2024 01:10 am GMT


External Microphone

rode external mic for filming hunts

An external mic will help you capture sounds from farther away than if just using the mic on the video camera.

Every camera you buy comes with a built-in microphone, and they work decent most of the time. However, they are just not as clear or as sensitive as they need to be when capturing the sounds of the woods.

There’s just something special about being able to hear the leaves crunching under the deer’s feet when you are watching your hunt on TV or on social media. You will hear a lot less of those types of natural sounds without an external microphone.



Another problem with not having an external microphone is when you put distance between the camera man and the hunter. An external microphone will give you a lot more range of distance than your standard camera mic.

It is true, most people will watch bad footage with good audio before they will watch good footage with bad audio. Rode Mics offer a variety of microphones for most cameras.

Trust me when I say, you will want to get an external microphone!



Fluid Head

sony 4k video camera for filming hunts and fluid arm and remote

The fluid head, as seen here attached to the tripod, helps you make smooth, controlled camera movements. The remote allows you to operate the camera with one hand, freeing up the other for your bow or gun.

Yeah I know, I thought the same thing when I heard about “fluid heads.”

So, what is a fluid head?

It’s an attachment that fits onto your camera arm that works by hydraulic fluid. The hydraulic fluid head allows you to make smoother movements with your camera. This creates better, higher quality footage for your viewing.

Pro Am has some very good fluid heads at reasonable prices. ($100-$300)


IFOOTAGE Video Tripod Head Fluid Drag Pan Head for DSLR Cameras, Camcorder, Monopod and Tripods, Komodo K5
$149.00
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/27/2024 02:04 am GMT

Remote Control

A remote control for your camera is very important, especially if you are self-filming. It enables you to basically do everything with one hand so you can use your other hand to grab you bow or your gun.

Most cameras have remote controls that can be purchased for them. I prefer to use the remote controls that are wired and plug directly into the camera.

Camera remotes are made to attach to your camera arm handle and can be a lifesaver when a deer walks into range. They help you minimize movement while your target animal is close.

Second Thing You Need: PASSION

hunting video equipment

Getting started videoing your hunts is not as expensive as you might think. There are many affordable options available for you to begin capturing those unforgettable outdoor moments.

Passion is nothing more than a strong desire for something. And, if you are going to film your hunts, you are going to need a strong desire to do so.

I promise you there are going to be moments when you will wake up and you are already late to your stand and taking time to get camera gear to the tree will make you even later.




Then, there will be times when you will forget pieces of equipment and the thought will run across your mind, “I don’t know why I even mess with this junk. I’m not doing this anymore.”

Possibly, even worse than that, you will have a big buck bust you because you were reaching for the camera instead of your bow. It’s during these moments that it will take passion to help you keep going.

To successfully film your hunts, the second thing you need is to have passion in the following three areas…

  • Passion for hunting: Passion for hunting is probably the most obvious one. You have to love the hunt! Passion for hunting is what is going to keep you in the woods experiencing all of the things that are film-worthy. If the idea of being perched up twenty feet in a tree with a bow in your hand anticipating a big buck coming near gets you excited, then congratulations, you have a passion for the hunt!
  • Passion for telling the story: I had a man tell me once, “You tell stories really good.” That’s because I have a passion about telling stories. When I tell a story, I want people to feel what I was feeling, hear what I was hearing and see what I was seeing. Being able to take your camera and video everything that you are experiencing in the woods is being able to tell your story. It gives the viewer an opportunity to see what you saw, hear what you heard and feel what you felt. You will need a passion for that in order to overcome the difficulties that come along with filming.
  • Passion for new challenges: It is an understatement to say that filming your hunts is a challenge. It is actually beyond a challenge to be able to put it all together and film a successful hunt, but it sure is fun trying. One of the hard parts is learning all of the new things that make you better at filming your hunts. Anything from positioning your camera to learning how to edit your videos. Each one of these things can provide its own set of challenges, so you will need to be excited about learning new things. If you have a passion for new challenges then you are going to love filming your hunts.



 Final Thoughts On Self-Filming Your Hunts

There are so many more things that can be written on the subject of filming hunts.

The further you dive into the process more questions will come about camera equipment, editing, producing episodes for social media, etc. However, if there was one more piece of advice I could give you on this subject, it would be to remind you to have fun.

The camera is just a great way to share the memories of the love of the hunt, it is never meant to replace the love of the hunt. Sometimes the pressure of trying to get it all to work out on film can rob you of the fun of the sport of hunting.

Make up your mind before you begin the journey that you will always love the hunt more than you love the camera.

Casey Johnson of Huntreal Outdoors
Casey Johnson is the founder of Huntreal Outdoors. Follow their Instagram and you can also follow Casey’s story on his YouTube channel.

Surface Explosion | Best Top Water Lures For Bass

on . Posted in Blog, Fishing

One of the most visual and fun ways to catch bass is with a topwater lure.

When you can actually see a monster largemouth fly through the water column and breach the surface, your adrenaline will be pumping to the max.

So, let’s take a look at some of the best topwater lures for bass as well as some tips and tricks for increasing hookups.

West Wells holding largemouth bass wearing N1 Outdoors fishing shirt

Topwater fishing for bass can be an experience you won’t soon forget. Let’s check out some different types of topwater options…

Best Topwater Lures for Bass | The Rundown

In this section, we will mention some top-tier topwater lure brands, but the main point is to cover the types of topwater lures, not necessarily specific models.

You can click any of the links below to jump straight to that particular topwater lure.

1. Hollow-Body Frog

hollow body frog for topwater fishing

A hollow-body frog is a great option where there is vegetation or other potential for snags on the surface of the water. (Photo: Drew Pierce)

“Frogging” is one of the most popular topwater strategies, as big bass love to munch on frogs. This is especially true in areas with algae, lily pads, and other things on the surface. Because the hooks are tucked into the backside of the lure body, you will not snag everything you hit on the surface.


LIVE TARGET Hollow Body Frog, 2.25", Green Yellow
$16.61
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/28/2024 12:42 am GMT


We specifically denote the hollow-body variation because it is the most common and easy to use. There are other types of topwater frogs, but this one tends to be the most versatile.

Companies like Scum Frog and Booyah do a great job of crafting hollow-body frogs. Once you can learn to walk the frog, the bites will come in full force.




2. Popper Lure

popper lure for bass

Poppers, when jerked, throw water in a forward motion, creating water disturbance that get bass’ attention. (Photo: Drew Pierce)

Especially for smallmouth, poppers are great topwater lures that provide more extreme action. Rather than being subtle with your action, poppers are made to throw water forward and cause a disturbance on the surface.

These are hard-bodied lures that feature two treble hooks on the bottom. The cupped mouth allows for the popping of water. With this build, it is perfect in open, clear water as it will not work correctly if it comes in contact with items on the surface.



Strike King KVD Splash Jr. / Natural Shad, 2 1/4-inch
$9.99
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/27/2024 01:25 am GMT


3. Buzzbait

buzzbait topwater bass lure

Buzzbaits are like a spinner bait that runs on the water’s surface, and they can lead to some violent topwater blowups! (photo: Drew Pierce)

Buzzbaits are basically spinnerbaits with a propelling tool. So, instead of diving down into the water column, they stay on the water’s surface and provide a sort of bubbling effect.

This gurgling and spinning is super enticing to bass and can be used in a variety of situations.

Use the same colors as you would with a spinnerbait, as white and chartreuse and black and blues can get the job done.



Megastrike Cavitron Buzzbait (1/4-Ounce, Gold Blade Chart/White Skirt)
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.


4. Spook

spook topwater lure

While spooks can be expensive, there are many simple versions in basic colors that can help you land a topwater bass. (photo: Drew Pierce)

Although spooks are usually used in saltwater, bass spooks provide awesome action to seek out the larger fish. Spook lures are long, tube-like lures that are walked on the surface.

Spooks provide serious, big action that will weed out the smaller bites and focus on the trophies.

Spooks can be quite expensive, and there is really no reason to spend hundreds of dollars on the high-end stuff. Keep it simple with the classic colors, and spend your time perfecting the action.



Heddon Super Spook Topwater Fishing Lure for Saltwater and Freshwater, Red Head, Super Spook Jr (1/2 oz)
$8.49
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/28/2024 12:28 am GMT




5. Jitterbug

jitterbug lure

The Jitterbug is a topwater classic that mimics bugs on the water’s surface. (photo: Northwoods Lures)

A lure that is somewhat similar to a popper is the Jitterbug.

The classic Jitterbug is made by Arbogast, and has a bit of a different action from it’s cousin, the popper.

The Jitterbug features a couple-cupped front lip. This gives the Jitterbug a back-and-forth motion, so it can be used with a steady cadence.

Jitterbugs are also a bit smaller and chunkier than poppers, so they are good about imitating bugs that are warbling on the surface. Black and green is a really popular color for the Jitterbug, so keep that in mind.


Jitterbug Topwater Lure, 2", 1/4 oz, Frog/White Belly, Floating
$12.50
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/28/2024 12:37 am GMT


6. Popping frog

popping frog topwater bass lure

Popping frogs have a lip similar to popper lures that works well in open water. (photo: Drew Pierce)

Obviously, the first item on our list was the hollow-body frog, but a popping frog deserves its own section.

Popping frogs have cupped mouths to provide that popping action on the surface. This lure has its own section because the action and use is completely different.

A popping frog is best in open water and near edges rather than in the muck.  This type of action is super enticing and will add some spice when a regular frog isn’t getting it done.



Rebel Pop'N Frog Fishing Lure, Cricket Frog, 1 7/8 inches
$9.41
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/28/2024 12:57 am GMT


7. Floating Minnow

floating minnow for bass

A floating minnow resembles a jerkbait, but can be worked with “twitching” of the fishing rod. (Photo: Rebel, Amazon)

Finally, we have the floating minnow. A floating minnow looks exactly like a jerkbait, but you do not have it dive down into the water column, but rather work it on the surface.

The bill is there to shift the lure side to side and provide a swimming action. With the hard body and two treble hooks, hookups are strong and easy.

The key to a good floating minnow is a colorway that looks as natural as possible. When you pair a good color with the right action, you are in a great place for success.


Rapala Original Floater 05 Fishing lure ( Fishing lure (Gold, Size- 2)
$6.38
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/28/2024 12:33 am GMT


Topwater Bass Fishing Tips

Now that we’ve covered 7 of the best topwater lures for bass, let’s cover some tips that will help you get more topwater blowups!

Find a cadence

With many topwater lures, you need some sort of consistency. With a frog, you want to “walk” it back and forth on the surface. This gives your lure a super realistic action that bass love to munch on.

With lures like the buzzbait, this is much easier, as you just need to reel it in at a steady pace.

Either way, find what your bass wants to bite and keep it consistent once you have some success.

man holding largemouth bass wearing N1 Outdoors fishing shirt

Sometimes finding the right cadence is all it takes to get the topwater action to heat up.



Mix up the colors

Believe it or not, the colors of your topwater lure do matter when it comes to fishing for bass.

It might seem useless to put thought into the color because the bass are below and you might be thinking they can’t tell the differnece. That is not the case.

You need to put some thought into the colors of your lures and mix them up if something is not working. If a certain frog has an unappealing shade when the bite is slow, mix things up and it might get the job done.

colorful topwater frog lure

Color is an important factor in choosing the right topwater lure for the situation. Don’t be afraid to mix things (and colors) up!



Find structure

Similar to any bass fishing strategy, structure matters.

When there is structure under the surface, there are likely bass chilling there. Just because you are working a topwater lure doesn’t mean that structure doesn’t matter.

So, when you can find structured areas, you’ll likely find bass willing to come to the surface and strike your lure. Working across points and over structure will increase your bites tremendously.

fishing structure log in water

Just because you’re fishing topwater doesn’t mean you shouldn’t find structure. Find the structure and find the fish.



Final Thoughts On Topwater Lures For Bass

If you are new to the topwater game, it can be so much fun. You’ll see, when a huge bass rams through the surface and bites your lure, the feeling is like no other.

Use these lure recommendations and tips to give you a good starting point for topwater fishing. Good luck, and put a hook N1!

g5 striker x broadhead test header image

Does X Mark The Spot Of A Great Broadhead? | G5 Striker X Review

Thanks for checking out my review of the G5 Striker X broadhead.

In this review, thanks to a friend who sent me a test pack, I tested a really popular broadhead that I’ve gotten a lot of requests about. I hope this review is of benefit to the bowhunting community!

The G5 Striker X Up Close…

Let’s take a close look at the G5 Striker X.

g5 striker X broadhead

The G5 Striker X is all-steel construction with a steel ferrule, steel tip, and steel replaceable blades. By my measurements, the blades are 0.032 inches thick based on the measurements with my micrometer.

G5 STRIKER X vented area on head

You’ll notice that the blades of the Striker X are fairly vented. That’s going to make them probably a little bit loud in flight, which doesn’t really bother me in a broadhead. Arrow noise has really never bothered me and I’ve taken animals all over the world.





The fact that the blades of the Striker X are so vented could spell problems for durability, so we’ll dive into that in our testing.

striker x ferrule and tip

Notice the dimple and the “scooped” ferrule on the Striker X broadhead.

Now, the tip of the Striker X is a really stout, all-steel chiseled tip. It’s not as sharp as some chiseled tips like the Grim Reapers, which are super sharp, or the QAD Exodus heads. However, the Striker X has just got a decent edge to its tip, it’s just not really that sharp.

It has a dimple that begins like a scoop, begins at the back of the tip and then goes down the ferrule. That’s going to aid in penetration and aid in flight as well. It makes it a bit more streamlined and aerodynamic.



G5 Striker X Testing

I was really eager to put the G5 Striker X boadheads through a battery of tests. Let’s see how they performed!

As always, I’m using my Bowtech SR6 set at 72 pounds and Bishop FOC King arrows at 460 grains. Let’s see how the Striker X performed!

Flight Test

In the flight test, I shot the Striker X heads from 40 yards. First, I shot a field point, and then two of the heads for comparison.

g5 striker x broadhead flight test vs filed points

Here you can see the results of the flight test (one field point and two broadheads to compare.




G5 Outdoors Striker X 100 Grain Broadhead 3 Pk, 180X, Stainless Steel
$41.99
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/27/2024 10:48 pm GMT


Out-Of-The-Box Sharpness Test

Initial sharpness reading of the Striker X out of the box was 125.

g5 striker out of box sharpness test

Here was the out-of-the-box sharpness test reading.



Ballistic Gel Penetration Test

I shot the Striker X into ballistic gel that was fronted with a 2/3″ foam matting and 1/2″ MDF.

G5 stiker X ballistic gel test

The Striker X penetrated 6-1/4 inches into the ballistic gel.



Edge Retention Test

After the ballsistic gel test, I checked the sharpness of the head again to see how well it held its edge.

g5 striker sharpness test after ballistic gel

After the ballistic gel penetration test, the Striker X had a sharpness reading of 200.



Layered Cardboard Penetration Test

I shot the Striker X into layered cardboard to see how many it could penetrate.

g5 striker x cardboard penetration test

The Striker X penetrated through 38 layers of cardboard.



Steel Plate Durability Test

Next, I shot the Striker X into a steel plate 5 times. On the fifth shot, this happened…

g5 striker x after steel plate test

The fifth shot was the charm… I mean, the HARM to the Striker X.

So, as you can see above the head held together through four shots through the steel plate. The blades are pretty vented, and so that’s where that weakness comes from.



To make the weight of having 4 blades, they have to be relatively thin and relatively vented. But again, they held together through four shots. And the tip got a little bit blunted, but it actually held together very well. It was still in good enough shape to sharpen out and use again.

The blades experienced quite a bit of edge chatter after the first shot. The chatter then increased with each subsequent shot.



LimbSaver Broadband Dampener for Solid Limb Compound Bows, Black, 2-Pack
$13.99
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/28/2024 12:53 am GMT


G5 striker x steel plate test holes

Here, you can see the wound channel in the steel plate and you can see that square hole in the middle and then the four slits coming off of it. Now, there’s other 4-blade broadheads that make a better square hole than this. This is more of like the hole within the slits rather than a bigger square. So it’s a decent wound channel but there are other broadheads that make a better wound channel with the same cutting diameter.

So, after this test, these blades are not reusable. You would have to file away way too much in order to use them again. It held together better than some, not as well as others.

The head did still spin true, though. So, the ferrule didn’t bend, which is a by-product of that all-steel construction.



Zero Penetration Test | Cinder Block

Finally, I shot the head into a cinder block…

G5 Striker cinder block text

Here’s a look at the hole the Striker X put in the cinder block.

How about a shout-out to the Bishop FAD Eliminator Arrows? I’ve lost count how many times I’ve shot this one arrow into concrete!

G5 Striker x rolled tip after cinder block test

Here’s the head after impact in the concrete, spins extremely well. The only damage you can see is that the tip got a little bit rolled over, a little bit curled there and blunted on the end. The edges of the tip, they got blunted as well, but they held up well and the structural integrity of the head is just fantastic.



Final Thoughts and Score Cards On Striker X Broadheads

So what do you think of the Striker X?

It performed pretty much as I expected. It was just pretty average to be honest.

Now, the cut size is above average. The sharpness was above average. And, the way it held up to zero penetration test in the concrete was above average.

But, the blade durability, the edge retention through the steel plate, and the penetration… those things were about average or below average, honestly.

If you compare this head to say, Tooth of the Arrow XL, it’s just not close.




So, if you compare it to some other similar heads in the market, it just doesn’t stack up. So, I’d say they’re a decent choice. It’s a good average head and it will get the job done.

If you’re a big fan, more power to you. But I think there are better choices out there.

Good luck out there bowhunting!

scorecard for G5 striker x
G5 Striker X lusk golden arrow grade

Be sure to check out all our bowhunting shirts!

John Lusk archery goat
John Lusk of Lusk Archery Adventures