wolf howling

How Big Are Wolves and What Do They Eat?

Few animals cause as much controversy as the wolf.

Their rugged and savage beauty has inspired people throughout the world.

While they’re considered an apex carnivore, their grace in capturing their prey or how they hunt is undeniable.

The wolf has captured imaginations for hundreds of years, however, they are not necessarily favorites of farmers.

While many people love wolves, their are many others that do not. This is especially true for some hunters, and even farmers, who may already be dealing with the damage that deer can do to crops.

Add in the occasional missing livestock animals and it’s easy to see why wolves may not be a farmer’s favorite animal.

However, it’s hard to deny that the wolf (or Canis lupus) has captured the world’s imagination for centuries.

As these wild creatures continue to roam the land, they’ll continue to keep us in awe for more to come.

Wolves have been the inspiration for artists and also prey to those who hunt them, and make up an essential part of the world’s ecology.


Byrna LE - Kinetic Ultimate Bundle | Less-Lethal Self-Defense & Home Defense Device (Black)
$509.99
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
03/06/2024 08:00 pm GMT

Species of Wolves

Depending on where you live, knowing what wolf species can be found in your area will help if you’re a hunter or a farmer.

Preparing yourself by knowing which species of wolf that may roam your area is essential for protecting your property or helping to thin the pack.

In addition to learning how big the various species of wolves get, you may also be wondering where do wolves live? This list will help you with that question as well.

A question often asked is… how big do wolves get? Well, it depends on the species. But, regardless of species, they all are impressive animals in the wild.

The Grey Wolf

grey wolf

Grey wolf (photo: WikiMedia Commons)

If there’s a standard image for a wolf, then the Grey Wolf (or GRAY wolf) is what goes through many people’s minds.

Grey wolves are massive creatures. Adult grey wolves can stretch from four to six feet long and can weigh from as much as a medium-sized dog at forty pounds, to an impressive one-hundred seventy pounds.

Keep in mind that wolves over a hundred pounds are relatively rare, but it’s possible to see one if you’re in the right area. Grey wolves are found in North America and Eurasia.

And, while these animals are wild, the chances of them attacking you are extremely rare. No matter how Hollywood portrays them, they’d rather keep their distance from you.



The Timber Wolf

Timber Wolf is a general term for three subspecies (Canidae).

The Canidae family is large.

The timber wolf name makes up the Eastern Wolf, Northwestern Wolf, and the Northern Rocky Mountain Wolf.

eastern wolf

Eastern Wolf (Photo: Wikimedia Commons)

The Eastern wolf is usually found in the Great Lakes area of North America, particularly Wisconsin, Michigan, and Minnesota.

The Eastern wolf can also be found in Ontario, Canada.

These wolves range average around sixty-five pounds and around 32 inches in height.

Northwestern wolves can grow as hefty a one-hundred pounds and can reach an impressive length of five to six feet.

They are usually found in Alaska and Canada.

northern rocky mountain wolf

Northern Rocky Mountain wolf (photo: Wikemedia Commons)

The Northern Rocky Mountain wolf is approximately seventy to one-hundred-fifty pounds.

This species is usually found in the Rocky Mountain area of Wyoming, Montana, and Idaho.

While all Timber wolves have a similar appearance, body structure and coloring will set them apart.



The Red Wolf

The Red Wolf, also known as Canis lupus rufus, is a protected animal covered in the Endangered Species Act.

They will have a reddish tint to their fur.

red wolf

Red wolf (photo: WikeMedia Commons)

Their range is usually limited to Pennsylvania, North and South Carolina and has been seen as far south as Texas.

They are relatively small for a wolf at four feet long and forty to eighty pounds.

They stand about twenty-five inches tall.



The Arctic Wolf

This wolf, Canis lupus arctos, is a subspecies of grey wolf and is one of the enormous wolves around. It can reach five to six feet in length and weigh up to one-hundred sixty pounds.

arctic wolf

Arctic wolf (photo: WikiMedia Commons)

The Arctic wolf lives in the North’s harsh climates like the Arctic Circle in Canada and parts of Greenland.

This area is helpful for the species as they’re rarely hunted and have little fear of humans. Fortunately, a wolf attack is still rare.



Marmot Trestles 30 Degree Mummy Sleeping Bag
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.

The Eurasian Wolf

These ferocious wolves are legendary in their size. They reach seventy to one-hundred seventy pounds and stand around thirty inches high. They also have a length of five to six feet.

Eurasian wolves are native to Europe and parts of the Soviet Union.

Eurasian wolf (photo: WikiMedia Commons)

Fortunately, they don’t interact with humans but are relatively resilient as they’re hunted heavily.

Their legendary status comes from their reputation that spans as far back as the medieval ages. In those times, an attack on humans was more common than today.





What do Wolves Eat?

Wolves are primarily carnivores (meat-eaters). They prefer to eat larger hoof-type animals like various types of deer, bison, elk, and moose.

Wolves will also hunt and eat smaller animals such as beavers, rabbits, and rodents. These smaller animals will supplement their average dietary needs. Wolves are also known to eat fish, but this isn’t common.

While meat is the main staple of a wolf’s diet, they have been known to eat berries as well. Still, the quantities are relatively small and not considered a dietary need.


#ad


Wolves have a large appetite and can eat up to twenty pounds of meat in a single meal.

While wolves can eat a lot, their eating habits can be feast or famine. So, if they find food, they’ll eat a lot of it. This gorging is especially helpful in sustaining them for the times when they can’t find much to eat.

While wolves are carnivores, they prefer to be as far from humans as possible. They travel in packs that can range for up to a dozen wolves. However, packs aren’t as tight as many would think. Wolves will leave an area if there are no resources and will only seek a new mate if their current one dies.



Wolves have long held a mystique to people around the globe. Their grace and savage beauty have earned them fear and respect, with many hunting them out of need or sport or working to save them.

Though wolves carry with them controversy, their resiliency in surviving in the modern world shows how strong they are and how far they’ve come.

They’ve capturing imaginations worldwide, and many religions around have held them in awe as well as honor.



day six evo and evo x broadheads

“And on the sixth day…” | The Day Six Evo and Evo X Broadheads Review

In this broadhead review, I tested the Day Six Evo and the Evo X.

So, let’s jump right in, zoom in and check out the Evo and the Evo X…

day six evo

Here’s a good look at the 125-grain Evo. The cutting diameter of the main blade is 1-1/16 inches and the bleeder in this model is a half an inch. (You can also get these bleeders to be 3/4 of an inch, and that would add an extra 5 grains to the overall weight.)

The blades are not vented, which makes them a lot quieter in flight, and also a bit more durable. Also, notice the gentle convex curve. That’s to aid in penetration as well as to increase the durability just a bit.

day six evo bleeders

The thickness of the main blades is 0.060 inches thick. Interestingly enough, the bleeders are just as thick as the main blades.

Now, as for the materials, the blades are a CPM S30V steel, which is a really fine steel that’s used in a lot of fine cutlery and knife applications.

One advantage of it is its Rockwell hardness. It’s brought to a Rockwell hardness of 59-60, which means it’s going to have a really nice edge to it.

It also has a greater impact resistance than most stainless steels, like the typical 420 or 440. It’s much more resistant to impact than those.

day six evo back of blades sharp

Notice that the blades of the Evo are sharpened on the back of the bleeders as well as for the main blade. And those are at a straight angle. The ones that are curved are only the main blade. This can sometimes present a challenge in re-sharpening, but you can use the Stay Sharp Guide C Model which is designed for concave or convex heads. You can use that with any kind of a curved broadhead and it makes it just as easy as the straight edges to re-sharpen.



Now, it’s not as resistant to impact as a tool steel like an A2 or an S7 for example. Those are much more resistant to impact.

Another advantage is its corrosion-resistance. It’s not going to rust. Some of those other high-carbon steels and tool steels can have a tendency to rust, which can take away some of the sharpness of the blades.



Another advantage of the CPM S30V is that it’s made right here in the USA, as is all the construction of this broadhead, so that’s kind of nice.

I was really eager to put the Day Six Evo head to the test, but I not only tested this head, I also tested its big brother, the Evo X!

day six evo x broadhead

This is the 150-grain model of the Evo X. So, everything is the same with this one in terms of the steel and the thickness. However, the cutting diameter is 1-1/4 inches as opposed to 1-1/16 inches. And the bleeder is still the half inch bleeder.

So I was eager to put both of these heads to the test and see how the Evo and the Evo X performed.

Let’s see how they did!





#ad


Day Six Evo and Evo X Broadhead Testing

For these tests, I used my Bowtech SR6 and I’m using a Bishop FOC King Arrows for most of the shots but then I use the Bishop FAD Eliminator for the really hard impact shots.

Flight Test

evo flight test

For the flight test, I shot two broadheads and a field point at 40 yards to see how well they group. Here’s a look at the Evo.



evo x flight test

Here is how the Evo X fared in the flight test.



#ad


Initial Sharpness Test

evo out of the box sharpness

The initial sharpness out of the box for these heads was 150.



Penetration Test 1: (Ballistic Gel)

I shot the Evo and Evo X into ballistic gel fronted by 1/2-inch MDF and foam matting.

evo and evo x ballistic gel penetration

The Evo penetrated 8-1/4 inches and the Evo X penetrated 7-1/4 inches.




Edge Retention Test:

evo sharpness after penetration test

After the first penetration test, I tested the sharpness of the heads again. 200 was the result.



Penetration Test 2: (Layered Cardboard)

evo layered cardboard

The Evo penetrated through 66 layers of cardboard…



evo x layered cardboard

…and the Evo X penetrated through 57 layers.



#ad

Bushnell Engage Hunting Laser Rangefinder_LE1300SBL, Multi, One Size
$152.86
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
03/06/2024 08:05 am GMT

Durability Test: (22 Gauge Steel Plate)

evo and evo x holes in steel plate

Here’s a good look at the wound channel of each of these heads. The Evo on the bottom right and the Evo X in the upper left and the slightly larger holes that it made.



evo after steel plate test edge chatter

Here’s the Evo after 5 shots to the steel plate and as you can see, it did very well. The bleeders are perfectly intact, the main blades perfectly intact, and it spins very well. The only damage is that there’s a little bit of edge chatter on each of the main blades. There’s really no edge chatter on the bleeders at all.



evo x after steel plate test edge chatter

Here’s the Evo X after 5 shots to the steel plate and it did very well also and it spins perfectly true. The bleeders and main blades are all intact. Again, just like the Evo, there’s just a little bit of edge chatter that you can see along the main blades; a little bit more on this as opposed to the Evo. This is probably because of the width as well as it being 150 grains, as you get that slightly more momentum on impact. But, it still held up very well.



Concrete Test:

evo and evo x cinder block test

I shot the Evo (right) and the Evo X (left) into a cinder block to see how well they would penetrate…



evo after cinder block test

Here’s the Evo after impacting and sticking deeply in the concrete. It took a while to get it out. That was one of the deepest-penetrating heads I’ve had in the concrete. And, you can see, the blades held together very well. The bleeders are perfectly intact. There’s just this little bit of a chunk that was taken out of the end of the Evo, but other than that, it did very well and still spins true.



evo x after cinder block test

Here’s the Evo X after impacting the concrete and it did very well. The blades held together perfectly. There’s really very little edge chatter. However, there is a bit of a bend that you can see there in the blades. Now, it still spins fairly well, but there’s that bend in the blades. Pretty impressive durability overall.



Final Thoughts on Day Six Evo and Evo X Broadheads

So, are you looking to weigh the factors and make a decision on a broadhead?

Well, what do you think of the Evo and the Evo X?

I don’t know if you know it or not, but Day Six comes from Genesis 1:31 in the Bible.

As a pastor, I know that Day Six of creation is when God looked back after the 6th day and saw that everything He created was good.

So, that’s how they came up with a name indicating that what they are creating is good.



I don’t know if I would have necessarily said that a few years ago about the first iteration of the Evo and the Evo X, but the improvement that they’ve made for the last couple of years in their broadheads has really made a difference.



Now, I would say, yes, it was made and it was made very good!

That 0.060 inch of thickness made a significant difference in the durability. So, if you are looking for a really stout, deeply-penetrating, tough broadhead with a lot of different variations in cut size as well as weight, you need to check out the Day Six Evo and the Evo X.

Great job, Day Six!

fobs vs vanes picture

Fletch Fight | FOB Archery vs Vanes

Over the years I had heard about the “FOBs” from FOB Archery on various archery forums. I learned that FOB stands for “Fletchings Only Better.”

But what was the story behind this new product, and would it really work better than fletchings or vanes?

The History of FOB Archery

john lusk holding a fob

The FOB is made of nylon and has “fletchings” that are at a 4-degree off-set.

The FOB was designed by an aerospace engineer named Paul Morris. He designed it based on the concept of aerodynamics.

He believed there was a away to improve upon the old fletching that Native Americans and people all over the world had been using for years and also in competitive archery. At the time, the FOBs were known as Starrflight FOB.

But then, in July of 2018, three business partners purchased the company from Morris and rebranded it to FOB Archery.

Keep reading for an in-depth look at the FOBs to find out if they’re right for you…

FOBs At First Glance

I finally got around to testing the FOBs. I have to be honest, when I first started reading about them and saw them, I was like, “Really?” My B.S. meter was going off a little bit.

But, I decided to give them a try.

The FOB is made of nylon. It looks simple, and in some ways, it’s exactly that. But in other ways, it’s very meticulously designed.

It simply slides onto the end of the nock. Then you insert your nock into the arrow shaft and you have essentially fletched your arrow. It’s that simple… and it’s fast.

No glue. No time. Just boom! And it’s done.


>> View more N1 hunting shirts and the stories behind each design


An In-Depth Look

The circular ring around the FOB is thicker in the front than it is in the back. It’s an air foil design that aides in the stabilization and flight of the arrow.

fletchings only better

The FOB, although just a small piece of nylon, is precision crafted to give arrows proper in-flight stabilization.

The three little “vanes” are at a 4-degree offset. In effect, very And then these vanes if you will, the three little vanes, they are at a 4-degree offset.



The FOBs claim to be more accurate in a cross-wind than fletchings. The theory is that the cross-wind will blow a fletched arrow more off-course due to the larger surface area on the back of the arrow.  

The combined with the air foil design, the offset vanes allow for greater spin. With the thicker front portion of the ring, and the thinner part in the back of the ring provides 360-degrees of stabilization.


#ad


Offset fletched vanes will rotate, but technically not the 360-degrees of stabilization that the ring of the FOB provides.

I should note that the blazer vanes I typically use are different than what most people use. I use a 4-degree helical setting. So, they are put on with a 4-degree helical using an Arizona EZ Fletch.



That gives you the fastest rotation that you can get with blazers.

Sometimes people use the blazer vanes with an offset at 3 or 3-1/2 degrees. Some will just buy them from the factory in a straight position. But, when you put them on with a helical, they spin a lot better and you get better groups.

I tested the FOBS compared to the 4-degree helical blazers to see how well the fly and group. I tested indoors and outdoors with field points and also outdoors at long range using broadheads.

FOB Archery vs Vanes Indoors at 40 Yards

fob arrows vs vaned arrows on target

When compared to arrow with Blazer vanes with a 4-degree helical twist, FOBs grouped extremely well indoors at 40 yards.

Outdoors at 40 Yards

fobs and blazer arrows on target

The FOBs vs Blazer vanes at 40 yards outdoors. They also performed very well in this test.

With Fixed Blade Broadheads at 80 Yards

fobs and vanes outdoor target at 80 yards with fixed blade broadheads

I shot the FOBs vs Blazer vanes at 80 yards outdoors with fixed-blade broadheads.

Ballistic Gel Testing

ballistic gel test setup for fobs

This test consisted of ballistic gel with MDF board in the back of the setup.

Next, I did some testing into ballistic gel, shooting a regular vaned arrow with the Blazers and an arrow with a FOB on it.

I wanted to see two things. First, I wanted to see how the penetration was affected by the fletching and by the FOB. Secondly, I wanted to see how effectively the FOB bounces off the gel when it is contacted.

I first shot the FOB and then the Blazers. On impact, the FOB bounced right back to my feet (about 4-5 yards).



FOB Penetration vs Blazer Vanes

The vaned arrow went through the ballistic gel and simply landed behind the gel block. It didn’t stick at all into the layer of MDF.

However, the bare shaft that had the FOB on it continued to fly through the gel and not only stuck into that layer of MDF, but actually penetrated all the way through it and popped out the other side and made a big dent in the next layer of MDF.


#ad



Notice that the arrow tip with the FOB on it penetrated better than the one with the Blazer vanes, because the vanes had to pull through the gel whereas the bare shaft just slipped right through.

After putting the FOBs through every test that I can think of, I was pleasantly surprised. Actually, I was borderline shocked by how well they performed. They passed every test I have.

fob arrow through ballistic gel

The FOB popped off the arrow, as advertised, when passing through the ballistic gel. It also penetrated the MDF board in the back of the setup.

fob penetration of mdf board

The arrow with the FOB on it penetrated the MDF board in the back after passing through the ballistic gel. The arrow with the blazer vanes passed through the gel, but landed without any penetration of the gel.

penetration of mdf with fob arrow

The arrow with the FOB on it passed through the ballistic gel and even penetrated the MDF board in the back. The arrow with the vanes didn’t even penetrate the MDF.

Pros and Cons of FOBs

Here is a summary of what I think are 7 pros and 7 cons to be aware of when considering using the “FOBs” from FOB Archery.

  The Pros:

installtion of fob

Installation of a FOB takes literally seconds.

  • Speed of fletching: You can fletch a dozen arrows in less than a minute instead of about an hour. And, you can do it in the field just as quickly.
  • Accuracy: FOBs are every bit is accurate as a 4-degree helically attached Blazer vane. That’s pretty darn accurate. So, I know that my vanes at a 4-degree helical vanes are more accurate than straight vanes and even more accurate than offset vanes at long distances. The FOBS group just as well.
  • Drift resistance: The FOBs are able to handle wind drift amazingly well. They are much less affected in a heavy crosswind than Blazer vanes or other vanes. That’s an important asset when you are bowhunting out West or shooting at long range.
  • Penetration: The superior penetration of arrows with FOBs surprised me. Because the arrow didn’t have the drag of the fletching, it just zipped through the ballistic gel and penetrated through a half inch of MDF. The arrow with the Blazer vanes did not stick into the MDF at all. That’s quite a bit difference in penetration. The lack of drag makes the difference. That was impressive.
  • Durability: I am very impressed with the durability of the FOBs. I shot them a couple hundred times. I’ve hit the FOBs with the tips of other arrows a number of times (they call this a “FOBinhood” when you stick one arrow inside the FOB of another arrow on the target). The FOB got a little dinged up at times but I have yet to break one. And, even when they are dinged up, they still work fine. TIP: If you are in a dry climate, you can soak the FOB in water, inside like a Ziploc bag or container for a day, they get even a little more pliable. This will help them become even more durable than they already are.
  • Quick Change Colors: Another little thing I like about them is that I can change colors without having to strip everything down off of a previous arrow and put on another one. I can just pop off the FOB and add a different colored one.
  • Ability to use arrows with bare shafts: Another strength of the FOBs is that you can use bare shafts. One of my best archery buddies, Shane Chuning, taught me that to always have a bare shaft in my target quiver so that I can test the tuning of my bow. This helps me test my own personal form. And, nothing reveals imperfections in form and tuning like a bare shaft. So, I always try to designate one arrow like that. With the FOBs essentially all your arrows can be bare shafts. You just pull that off and then you got bare shafts. You put the nock back in and you can tune a whole round of bare shafts and then put the FOBs on and shoot a whole round of fletched ones. So, that’s definitely a plus as well.

Summit SU81573, Viper SD with 13" Two Fold Hanger
$316.95
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
03/06/2024 02:45 pm GMT


The Cons:

So, now that I’ve covered the 7 advantages of FOBs, I’ll cover what could be considered disadvantages:

  • Must use a drop-away rest: To use FOBs, you must use a drop-away rest. They will not work with a prong rest, because the FOB won’t clear it. You also cannot use something like a whisker biscuit, as the FOB would come off as the arrow passes through it.
  • Cheek Interference: If your anchor point is way back, or at the back of your head, the FOB could catch your ear. That wouldn’t feel nice. Or, if you mash your arrow into your face, or have a large beard, you may have a problem using the FOBs. For me, the anchor point is not an issue with FOBs. With the way I anchor, I didn’t notice it, even with a heavy mask on that I use during cold weather. So, this may be an issue for you, depending on where you anchor.
  • “FOB Pinch”: Another con would be a “nock pinch” of sorts. Some individuals with really long draw length that shoot bows with a short axle-to-axle length could experience this. Because the FOB is so far back on the shaft, the string could pinch the top and bottom of the FOB at full draw. If that’s the case with you, the FOBs wouldn’t be right for you. FOB Archery is supposed to be coming up with a solution for this in the near future.
  • In-Flight Sound: Some individuals that have used the FOB say the sound is an issue. I compared them in flight to the sound of my 4-degree helical blazers, which are louder than straight or offset Blazers. To me, the FOBs sound about the same as the Blazers. I couldn’t tell a difference. I even tried a decibel meter, putting it a halfway down range to try to see if they pick up a difference. The decibel meter wasn’t sensitive enough to pick up any difference between the two. Honestly, I don’t worry about arrow flight noise. Instead, I worry about bow noise and human noise at the shot. My reasoning is that bugs are zipping around deer all the time. Birds are flying by. Leaves are falling. I don’t believe the arrow flight noise is an issue worth being concerned with and I’ve never had a problem with it during a hunt.
  • Finding Arrows: Another concern is from those who use lighted nocks. The thought here is that during a pass through shot, the FOB pops off, taking the lighted nock with it. So, you would find your nock easily enough, but not necessarily your arrow. If the arrow stays in the animal, well, you’re going to see it running off with a lighted nock as normal. One way to address this concern is to use a reflective wrap. And I find those just as effective as a lighted nock at finding your arrow because you shine a light on it and it lights up like a Christmas tree. I like to use a lighted nock for videoing, but a reflective wrap really helps you in finding that arrow. So, while some consider this a con, I do not.
  • Weight: Adding the FOB, makes an arrow heavier than using Blazer vanes by 8-10 grains. That’s very minimal in my mind. It’s kind of the difference between using a lighted nock or not, which doesn’t really affect my shooting accuracy unless I’m out well past 60 yards. In that case, I simply sight in my bow for lighted nocks, and the FOBs hit right where my lighted nocks hit. So, again, this “con” is a non-issue for me.
  • Cost: One other concern that people have expressed at times is the cost. I wondered about that too. So, where do FOBs fit in cost-wise? They are about $2.25 each. You get a 12-pack for $29. So, they are more expensive than just getting vanes and attaching them yourself. But, they are less expensive than paying a bow shop to attach your vanes. They are also less expensive than buying the shrink wrap vanes and putting them on.

If you do decide to purchase FOBs from FOBarchery.com, use code LUSK10 for 10% off!

Conclusion

In conclusion, I really like the FOBs. They passed every test I could think of. I’m ready to take them into the field!

For years, traditional archery has been married to the tried and true feathers and vanes. Let me know your thoughts or any questions you have on this alternative fletching in the comments below!