hunting video gear

Start Filming Your Hunts | A Self-Filming Checklist

I sat there stunned at what just happened.

I had traveled 500 miles for this particular moment, only to sit and watch this big Kansas buck walk right out of my life.

And, it wasn’t because I didn’t have the opportunity to let an arrow fly.

I actually took aim, settled my pin, and painfully watched my arrow hit right in front of his body.

big kansas buck

When you film your own hunts, moments like this will be captured indefinitely to not only relive yourself, but share with others.

I could not believe my eyes! I’ve made that exact shot in my yard 10 out of 10 times.

As I sat there 20 feet up in that oak tree, trying to figure out what happened, I heard something behind me coming down the same trail. I turned to catch a glimpse of a wide Kansas buck heading my way.

I couldn’t believe this was happening so soon after I had missed the other deer.

This time, I was even more determined to settle my pins and connect on this nice Kansas buck! 

As I released the arrow, I watched intently as it found its mark and sent the buck bolting through the woods to certain death.



Finally, after two years of hunting in Kansas, I was able to enjoy the fruits of my labor. It was a very exciting moment for me, as I anxiously texted my hunting buddies… “Big Buck Down.”

What makes this hunt even more special is the fact that I got it all on video.

Videoing my hunts allow me the privilege to watch them anytime I want to.

With today’s technological advances, it doesn’t have to cost an arm and a leg to get started filming your own hunts. Keep reading for two things that you will need to get started…

The scenario above happened almost a year ago. I went back and watched it five minutes before I wrote this article.

When I’m having a bad season and not seeing very many deer, I can always go back and watch the moment I killed my first Kansas buck.

Talk about a very rewarding experience.



First thing you need to film your hunts: Video Equipment

Choosing the right equipment is going to be a critical piece of the puzzle for creating quality footage of your hunts. This equipment can be as expensive or as cheap as you would like, depending on what you are after.

Let me just assume that most of us are on a limited budget but would still like pretty good equipment to capture our hunts.



The below list is certainly not all of the things that you could buy for filming your hunts. However, these are all of the things that you should buy for filming your hunts.

These pieces of equipment will help you be able to effectively tell your hunting story verbally and visually. 


Energizer 100AA Ultimate Lithium Long Lasting Leakproof Batteries
$209.00
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/23/2024 02:09 am GMT

There are five pieces of video equipment that are critical to getting started filming your hunts… and they won’t break the bank. Read on for specifics of each…

  • Camera
  • Camera arm
  • External microphone
  • Fluid head
  • Remote control

Video Camera

video camera for filiming hunts

The Canon 6D Mark 2 is a good camera for capturing your primary video while filming your own hunts.

Obviously, you cannot film hunts without a camera, but what camera do you choose? That’s a great question that gets asked often.

First, It is very important that you choose a camera that is “High Definition” and has good low-light capabilities. The high definition will help you have clearer footage and the low light capabilities will help you get a few extra minutes of film time in the morning and the evenings. After all, you never know when you’re going to see something so rare that you’ll wish you had footage of it later on.



It is also important that you get a camera that has an external mic jack. If you are self-filming, it is important for you to choose a camera that has a good auto focus setting.

We currently use a Sony Ax-53 ($800) and a Canon 6D Mark 2 ($1500.)

Secondary cameras are also a big help to capture extra footage, such as GoPro, Spypoint or Tacticam.




Camera Arm

fourth arrow video camera arm for hunting videos

It’s important to be sure you have a camera arm with enough length to film in some of the awkward positions hunting can put you in.

It wasn’t until a recent hunt that I realized how important stabilization was for a camera.

We were on a hunt and managed to forget the arm plate, so I had to free-hand film the hunt. A doe came into our location and circled around the tree and put me in an awkward position while filming.

When we watched the footage back on the TV, I was shocked at how shaky I was. This one experience made me even more of a believer in good camera arm.



It’s important to choose a camera arm that has some length to it. This will help when the deer puts you in an awkward position of filming across your body or around the back of your tree.

Fourth Arrow has some amazing camera arms that are affordable, ($100-$300) adjustable, and easy to use. Muddy also has some great camera arms that are reasonably priced ($100-$300) and easy to use.


Muddy Outfitter Camera Arm, Black, One Size
$86.85
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/23/2024 12:47 am GMT


External Microphone

rode external mic for filming hunts

An external mic will help you capture sounds from farther away than if just using the mic on the video camera.

Every camera you buy comes with a built-in microphone, and they work decent most of the time. However, they are just not as clear or as sensitive as they need to be when capturing the sounds of the woods.

There’s just something special about being able to hear the leaves crunching under the deer’s feet when you are watching your hunt on TV or on social media. You will hear a lot less of those types of natural sounds without an external microphone.



Another problem with not having an external microphone is when you put distance between the camera man and the hunter. An external microphone will give you a lot more range of distance than your standard camera mic.

It is true, most people will watch bad footage with good audio before they will watch good footage with bad audio. Rode Mics offer a variety of microphones for most cameras.

Trust me when I say, you will want to get an external microphone!



Fluid Head

sony 4k video camera for filming hunts and fluid arm and remote

The fluid head, as seen here attached to the tripod, helps you make smooth, controlled camera movements. The remote allows you to operate the camera with one hand, freeing up the other for your bow or gun.

Yeah I know, I thought the same thing when I heard about “fluid heads.”

So, what is a fluid head?

It’s an attachment that fits onto your camera arm that works by hydraulic fluid. The hydraulic fluid head allows you to make smoother movements with your camera. This creates better, higher quality footage for your viewing.

Pro Am has some very good fluid heads at reasonable prices. ($100-$300)


IFOOTAGE Video Tripod Head Fluid Drag Pan Head for DSLR Cameras, Camcorder, Monopod and Tripods, Komodo K5
$149.00
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/23/2024 01:44 am GMT

Remote Control

A remote control for your camera is very important, especially if you are self-filming. It enables you to basically do everything with one hand so you can use your other hand to grab you bow or your gun.

Most cameras have remote controls that can be purchased for them. I prefer to use the remote controls that are wired and plug directly into the camera.

Camera remotes are made to attach to your camera arm handle and can be a lifesaver when a deer walks into range. They help you minimize movement while your target animal is close.

Second Thing You Need: PASSION

hunting video equipment

Getting started videoing your hunts is not as expensive as you might think. There are many affordable options available for you to begin capturing those unforgettable outdoor moments.

Passion is nothing more than a strong desire for something. And, if you are going to film your hunts, you are going to need a strong desire to do so.

I promise you there are going to be moments when you will wake up and you are already late to your stand and taking time to get camera gear to the tree will make you even later.




Then, there will be times when you will forget pieces of equipment and the thought will run across your mind, “I don’t know why I even mess with this junk. I’m not doing this anymore.”

Possibly, even worse than that, you will have a big buck bust you because you were reaching for the camera instead of your bow. It’s during these moments that it will take passion to help you keep going.

To successfully film your hunts, the second thing you need is to have passion in the following three areas…

  • Passion for hunting: Passion for hunting is probably the most obvious one. You have to love the hunt! Passion for hunting is what is going to keep you in the woods experiencing all of the things that are film-worthy. If the idea of being perched up twenty feet in a tree with a bow in your hand anticipating a big buck coming near gets you excited, then congratulations, you have a passion for the hunt!
  • Passion for telling the story: I had a man tell me once, “You tell stories really good.” That’s because I have a passion about telling stories. When I tell a story, I want people to feel what I was feeling, hear what I was hearing and see what I was seeing. Being able to take your camera and video everything that you are experiencing in the woods is being able to tell your story. It gives the viewer an opportunity to see what you saw, hear what you heard and feel what you felt. You will need a passion for that in order to overcome the difficulties that come along with filming.
  • Passion for new challenges: It is an understatement to say that filming your hunts is a challenge. It is actually beyond a challenge to be able to put it all together and film a successful hunt, but it sure is fun trying. One of the hard parts is learning all of the new things that make you better at filming your hunts. Anything from positioning your camera to learning how to edit your videos. Each one of these things can provide its own set of challenges, so you will need to be excited about learning new things. If you have a passion for new challenges then you are going to love filming your hunts.



 Final Thoughts On Self-Filming Your Hunts

There are so many more things that can be written on the subject of filming hunts.

The further you dive into the process more questions will come about camera equipment, editing, producing episodes for social media, etc. However, if there was one more piece of advice I could give you on this subject, it would be to remind you to have fun.

The camera is just a great way to share the memories of the love of the hunt, it is never meant to replace the love of the hunt. Sometimes the pressure of trying to get it all to work out on film can rob you of the fun of the sport of hunting.

Make up your mind before you begin the journey that you will always love the hunt more than you love the camera.

Casey Johnson of Huntreal Outdoors
Casey Johnson is the founder of Huntreal Outdoors. Follow their Instagram and you can also follow Casey’s story on his YouTube channel.
g5 striker x broadhead test header image

Does X Mark The Spot Of A Great Broadhead? | G5 Striker X Review

Thanks for checking out my review of the G5 Striker X broadhead.

In this review, thanks to a friend who sent me a test pack, I tested a really popular broadhead that I’ve gotten a lot of requests about. I hope this review is of benefit to the bowhunting community!

The G5 Striker X Up Close…

Let’s take a close look at the G5 Striker X.

g5 striker X broadhead

The G5 Striker X is all-steel construction with a steel ferrule, steel tip, and steel replaceable blades. By my measurements, the blades are 0.032 inches thick based on the measurements with my micrometer.

G5 STRIKER X vented area on head

You’ll notice that the blades of the Striker X are fairly vented. That’s going to make them probably a little bit loud in flight, which doesn’t really bother me in a broadhead. Arrow noise has really never bothered me and I’ve taken animals all over the world.





The fact that the blades of the Striker X are so vented could spell problems for durability, so we’ll dive into that in our testing.

striker x ferrule and tip

Notice the dimple and the “scooped” ferrule on the Striker X broadhead.

Now, the tip of the Striker X is a really stout, all-steel chiseled tip. It’s not as sharp as some chiseled tips like the Grim Reapers, which are super sharp, or the QAD Exodus heads. However, the Striker X has just got a decent edge to its tip, it’s just not really that sharp.

It has a dimple that begins like a scoop, begins at the back of the tip and then goes down the ferrule. That’s going to aid in penetration and aid in flight as well. It makes it a bit more streamlined and aerodynamic.



G5 Striker X Testing

I was really eager to put the G5 Striker X boadheads through a battery of tests. Let’s see how they performed!

As always, I’m using my Bowtech SR6 set at 72 pounds and Bishop FOC King arrows at 460 grains. Let’s see how the Striker X performed!

Flight Test

In the flight test, I shot the Striker X heads from 40 yards. First, I shot a field point, and then two of the heads for comparison.

g5 striker x broadhead flight test vs filed points

Here you can see the results of the flight test (one field point and two broadheads to compare.




G5 Outdoors Striker X 100 Grain Broadhead 3 Pk, 180X, Stainless Steel
$41.99
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/23/2024 10:32 pm GMT


Out-Of-The-Box Sharpness Test

Initial sharpness reading of the Striker X out of the box was 125.

g5 striker out of box sharpness test

Here was the out-of-the-box sharpness test reading.



Ballistic Gel Penetration Test

I shot the Striker X into ballistic gel that was fronted with a 2/3″ foam matting and 1/2″ MDF.

G5 stiker X ballistic gel test

The Striker X penetrated 6-1/4 inches into the ballistic gel.



Edge Retention Test

After the ballsistic gel test, I checked the sharpness of the head again to see how well it held its edge.

g5 striker sharpness test after ballistic gel

After the ballistic gel penetration test, the Striker X had a sharpness reading of 200.



Layered Cardboard Penetration Test

I shot the Striker X into layered cardboard to see how many it could penetrate.

g5 striker x cardboard penetration test

The Striker X penetrated through 38 layers of cardboard.



Steel Plate Durability Test

Next, I shot the Striker X into a steel plate 5 times. On the fifth shot, this happened…

g5 striker x after steel plate test

The fifth shot was the charm… I mean, the HARM to the Striker X.

So, as you can see above the head held together through four shots through the steel plate. The blades are pretty vented, and so that’s where that weakness comes from.



To make the weight of having 4 blades, they have to be relatively thin and relatively vented. But again, they held together through four shots. And the tip got a little bit blunted, but it actually held together very well. It was still in good enough shape to sharpen out and use again.

The blades experienced quite a bit of edge chatter after the first shot. The chatter then increased with each subsequent shot.



LimbSaver Broadband Dampener for Solid Limb Compound Bows, Black, 2-Pack
$13.99
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/23/2024 12:28 am GMT


G5 striker x steel plate test holes

Here, you can see the wound channel in the steel plate and you can see that square hole in the middle and then the four slits coming off of it. Now, there’s other 4-blade broadheads that make a better square hole than this. This is more of like the hole within the slits rather than a bigger square. So it’s a decent wound channel but there are other broadheads that make a better wound channel with the same cutting diameter.

So, after this test, these blades are not reusable. You would have to file away way too much in order to use them again. It held together better than some, not as well as others.

The head did still spin true, though. So, the ferrule didn’t bend, which is a by-product of that all-steel construction.



Zero Penetration Test | Cinder Block

Finally, I shot the head into a cinder block…

G5 Striker cinder block text

Here’s a look at the hole the Striker X put in the cinder block.

How about a shout-out to the Bishop FAD Eliminator Arrows? I’ve lost count how many times I’ve shot this one arrow into concrete!

G5 Striker x rolled tip after cinder block test

Here’s the head after impact in the concrete, spins extremely well. The only damage you can see is that the tip got a little bit rolled over, a little bit curled there and blunted on the end. The edges of the tip, they got blunted as well, but they held up well and the structural integrity of the head is just fantastic.



Final Thoughts and Score Cards On Striker X Broadheads

So what do you think of the Striker X?

It performed pretty much as I expected. It was just pretty average to be honest.

Now, the cut size is above average. The sharpness was above average. And, the way it held up to zero penetration test in the concrete was above average.

But, the blade durability, the edge retention through the steel plate, and the penetration… those things were about average or below average, honestly.

If you compare this head to say, Tooth of the Arrow XL, it’s just not close.




So, if you compare it to some other similar heads in the market, it just doesn’t stack up. So, I’d say they’re a decent choice. It’s a good average head and it will get the job done.

If you’re a big fan, more power to you. But I think there are better choices out there.

Good luck out there bowhunting!

scorecard for G5 striker x
G5 Striker X lusk golden arrow grade

Be sure to check out all our bowhunting shirts!

John Lusk archery goat
John Lusk of Lusk Archery Adventures
buck under licking branch

Deer Scrapes | A Complete Guide

Deer are amazing animals, and they do some very unique things. One of these things is making scrapes throughout the woods.

Scrapes are one of the best ways that deer are able to communicate with each other through the scent that they leave behind, and it can also mean some amazing hunting for outdoorsmen and women who know how to find and identify a scrape. 

deer urinating in scrape

By learning about scrapes and how bucks use them, you can greatly increase your chances of harvesting a buck.

But, what exactly are scrapes, and how do you find them? How do deer make them and why do they even do it? Let’s take a deeper look into deer scrapes and answer all of these questions so that you can use them to your advantage this hunting season!

What are Deer Scrapes?

To start, it is important to understand exactly what a scrape is. A deer scrape is essentially a bare patch of ground that is usually in the shape of an oval or triangle and has an overhanging limb, called a licking branch, above it.

If you are not paying close attention, they can be very easy to miss.

In order to make a scrape, a deer will paw away the twigs, leaves, and vegetation to expose the bare soil, which is used for the scent that they then leave behind.

They will also rub their nose, mouth, and foreheads on the overhanging branch to leave some scent there as well. 


Put a trailcam on a scape location and you will learn a lot about whitetail buck activity!


What Do Deer Scrapes look like?

Scrapes can come in all shapes and sizes depending on the deer and the terrain.

Some scrapes that are made quickly by a buck can be as small as a few inches across on the ground, while older, more established scrapes can be as large as several feet in diameter.

To the untrained eye, they will look like a simple spot or small indention on the ground, but to an experienced hunter, it is a gold mine of opportunity!

deer scrape on the ground

Watch where you walk… You might just walk right through a scrape if you’re not familiar with what they look like.



Conquest Scents RuttingBuck Pack (Rutting Buck and EverCalm Stick)
$31.00
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/23/2024 12:12 am GMT


How Deer Make Scrapes and Why They Do It

Deer are able to communicate with each other through things like sound, body language, and of course, scent.

A scrape is one method that deer will use to communicate through scent and takes advantage of their incredibly powerful sense of smell.

Deer have several scent glands throughout their body in order to leave scent messages, including when they deposit them through a scrape. Their scent is put on the exposed soil as well as the overhanging branch so that other deer can smell it too. 

buck rubbing scent on a vine over a deer scrape

Bucks will use overhanging branches or vines to leave behind glandular scent. They will often lick and chew them as well.

When a buck goes to make a scrape, he will usually begin by rubbing his head and face on the branch. This allows his forehead, nasal, and preorbital glands to get their scent on the overhanging branch or vine.



It’s not uncommon to see them even lick and chew on the branch as well. This can take anywhere from 30 seconds to a minute or two. He will then start to paw at the ground to remove all of the fallen leaves and other debris underneath it. 


In this video clip, a young buck urinates and rubs his tarsal glands together while standing over a scrape.

Once the deer has unearthed enough fresh soil, he will then urinate in the small area he has dug up, leaving behind the freshly scented scrape for other deer in the area to find and smell.

The entire scraping process can take less than a few minutes, but a buck can leave behind an incredible amount of scent during this time.

Does will also use scrapes to leave urine and other glandular scents.



Wildgame Innovations Acorn Rage 15-Pound Bag
$26.06
Buy Now
We earn a commission if you make a purchase, at no additional cost to you.
12/23/2024 12:06 am GMT


When Do Deer Use Scrapes

Bucks will make and use scrapes throughout the entire year, but almost 80% of the action surrounding scrapes will take place in the few weeks leading up to their breeding season and into the rut.

This is when bucks are especially conscious of other deer in their area, both does and rival bucks.

In addition to leaving preorbital scent, bucks mark their territory by urinating in scrapes.

By leaving their scent in the scrapes, bucks are essentially marking their territory and preparing for the upcoming or present breeding season. 

It is true that deer will work scrapes during the post-rut and even other times of the year, but this is only a small fraction compared to the weeks and days leading up to the rut and the rut itself.

If you want to catch a deer using an active scrape, focus on peak breeding season in the area that you are in. 





How to Hunt Scrapes

Scrapes are one of the best indicators that bucks are in the area, and they can be used to help increase your odds of successfully filling your tags during hunting season.

In addition to signs like tracks, rubs, droppings, and deer bedding, scrapes can tell you for certain that the deer are frequenting the area and how often.

hunter looking at a whitetail deer scrape

Finding a deer scrape may provide an opportunity for you to get a shot at a buck that you might not ever see otherwise.



If there is a fresh scrape nearby, you will know it is an active location that could potentially yield some excellent results. Of course, you can always confirm this by setting out a trail camera in the area or on the scrape itself. 

If you decide to place a trail camera on the scrape, make sure that it is facing the scrape and that there are no obstructions.




When the trail camera captures pictures, this should give you a good idea of what time of day the bucks are coming by and what direction they are traveling. Using this information, you can decide if you should hunt near or over the scrape. 

Scrapes are also excellent at getting deer to pose for a trail camera, as they will almost always stop to smell a scrape. This can mean a great shot opportunity with a bow and arrow if you are hunting over one, as the buck should be standing still for you to shoot.

One of the biggest challenges with archery hunting is not only getting within range of a mature buck, but getting him to stand still long enough for an ethical shot. An active scrape could potentially help with both of these challenges! 



buck making a scrape

A buck working a scrape can provide some excellent shot placement opportunities for hunters, especially if bowhunting.

To best hunt over a scrape, try using a treestand that is within bow range of the scrape itself. This ensures that when a deer stops to smell everything, you can be in range and take advantage of the opportunity.

While ground blinds and box blinds can also work, treestands will conceal you much better and keep your own scent off the ground and away from the scrape. 



Find active scrapes during the right times of the year and you just might have some antlers for your wall!



Final Thoughts On Deer Scrapes

There is no question that deer are amazing animals, and using their scent via scrapes is just one example of the many unique things that they do.

Hopefully now you have a better understanding of deer scrapes, and can use them to your advantage this next hunting season